automatic industrial sampling
GS Gravity Chute Samplers
The model GS Chute sampler collects samples of free flowing materials including granules and pellets. The product collects a sample when mounted beneath an auger, drag conveyor or sloped gravity chute.
When activated, the sample discharge moves on a sliding plate over an opening in the chute housing, allowing access to the product stream. The opening, which can be sized per the material, allows the sample to enter the sample discharge port. The sample then flows through the opening and into the sample collection device of your choice. The slide plate and sample discharge port then returns to the start position, sealing the opening.
When activated, the sample discharge moves on a sliding plate over an opening in the chute housing, allowing access to the product stream. The opening, which can be sized per the material, allows the sample to enter the sample discharge port. The sample then flows through the opening and into the sample collection device of your choice. The slide plate and sample discharge port then returns to the start position, sealing the opening.
STANDARD CONSTRUCTION
Heavy gauge steel
POWER REQUIREMENTS
Electric: 110V single phase control
Pneumatic: 80 to 100 PSI
CONTROLS
The standard units allow for manual and automatic sampling operations. These units can handle a wide variety of voltages and frequencies and can be constructed for most environments.
The standard units allow for manual and automatic sampling operations. These units can handle a wide variety of voltages and frequencies and can be constructed for most environments.
Industrial Sampling:
Intersystems is ISO 9001 and 14001 certified